Davis 6336 Universal Anemometer Interface

For using a universal anemometer combined with Davis VP2

Davis 6336 Universal Anemometer Interface
135.00 *Prices include VAT
Article codeDA-6336

On stock


Usage
The Universal Anemometer Interface allows the use of a third-party (non-Davis) anemometer with a Vantage Pro2 Integrated Sensor Suite, in place of a Davis anemometer. Non-Davis anemometers must have AC voltage output signals; the frequency of the AC signal must be linearly proportional to the wind speed. The Universal Anemometer Interface has been tested with R. M. Young anemometers, model number 05103; and with NRG anemometers, model 1900 NRG#40C or MAX40. However the interface is not limited to those products. If used with an anemometer other than one manufactured by R.M. Young, a Vantage Vue console must be used as this console allows for the special calibration needed.

Specifications
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . .  -40° to +150° F (-40° to +65° C)
Storage Temperature  . . . . . . . . . . . . . . . . . . . . . . . . . . .  -50° to +158° F (-45° to +70° C)
Supply Power  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  0.14 mA (average), 30 mA (peak) (from external power source)
Battery  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  CR123A 3-Volt Lithium cell
Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8 months without sunlight - greater than 2 years depending on solar charging
Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Modular RJ-11
Housing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  UV-resistant PVC plastic
Dimensions (length x width x height)   . . . . . . . . . . . . . . .  6.25" x 2.25 " x 7.875 " (159 mm x 58 mm x 200 mm)
Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1.04 lb. (.48 kg)